What is the standard for peel off test?

You will get efficient and thoughtful service from Cell Instruments.

**Standard for Peel Off Test**.

Peel off test is an important method used to evaluate the adhesion strength of coatings, tapes, and other bonded materials. The standard for peel off test is defined by international organizations such as ASTM International and ISO.

*ASTM Standard:*.

1. **Select the Appropriate Standard:** The ASTM standards for peel off test include ASTM D3330/D3330M for pressure-sensitive tape and ASTM D903 for non-rigid substrates.

2. **Prepare the Specimen:** Cut the specimen to the required dimensions and ensure uniformity in surface preparation.

3. **Perform the Test:** The test is typically conducted using a universal testing machine (UTM) at a specified peel rate and angle. The force required to peel off the specimen is recorded.

4. **Calculate the Adhesion Strength:** The adhesion strength is calculated by dividing the peak force by the width of the specimen.

*ISO Standard:*.

1. **Select the Appropriate Standard:** The ISO standards for peel off test include ISO 527 for plastics and ISO 813 for flexible cellular materials.

2. **Prepare the Specimen:** Follow the guidelines provided in the specific ISO standard for specimen preparation and surface treatment.

3. **Perform the Test:** The test is carried out using a suitable testing machine with a specified peel rate and angle. The maximum force recorded during the test is used to calculate the adhesion strength.

4. **Report the Results:** The test results should include the adhesion strength, peel rate, and any relevant details about the specimen and testing conditions.

By following the standardized procedures set by organizations such as ASTM and ISO, the peel off test can provide valuable information on the adhesion properties of various materials. Adhering to these standards ensures consistency and reliability in test results, allowing for meaningful comparisons between different materials and coatings.

Read more

For more information, please visit HTT-01 Hot Tack Tester.