We design, and manufacture premium connection technologies and sell OCTG from the world&#;s leading manufacturers to the energy and geothermal markets.
Equipment manufacturing and services for downhole intervention in producing wells for logging or other well services.
Crossover Adapters primarily for connecting wireline PCE to wellheads, or for connecting a flanged component within a string of PCE
Hunting Quick Union Lift Caps offer a means of lifting a piece of equipment and also, of pressure testing it. This can save a great deal of time and expense as a lot of lifting is carried out during testing operations.
Fit into a Quick Union Box and can be used for pressure testing of pressure control equipment
The Ezi-Latch Transport Frame is the best way to store and protect equipment for Ezi-Latch operations
The Inverted Ezi-Latch is designed to quickly connect the Pressure Control Tool String or Night Cap to the Wellhead.
Aiding the injection of inhibitor chemicals and de-icing agents onto the wireline or into the wellbore during routine operations
Positioned on top of the lubricator rig up, the Grease Injection Control Head is designed to contain well pressure whilst running braided cable into or out of the well.
The Hunting Hydraulic Grease Head Cable Cutter is an accessory that fits beneath the bottom flow tube of a Grease Injection Control Head.
Hunting lubricator and riser sections are designed to act as chambers for deploying wireline tools into the well whilst under pressure.
Hunting manufactures and supplies a wide range of Lifting Clamps and Spreader Bars, suitable for lifting lubricators and Pressure Control Equipment in a safe and controlled manner.
Hunting&#;s Riser Lock clamps are designed to adapt above the quick union collar of lubricator joint or similar piece of pressure control equipment (PCE) quickly and easily.
The Hunting Test Fixture is designed to offer a safe and convenient method of conducting a load or pull testing and can adapt to a large variety of Hunting products.
The Hunting Ball Valve is a fully opening hydraulically controlled valve, designed to hold pressure from above and below.
The Hunting DSL Debris Wiper is supplied with quick unions on top and at the base as a standalone assembly placed directly below the Pack Off Antenna Sub and above the lubricator.
Hunting Hay Pulleys are designed and manufactured to withstand the increased loads that the new generation of slicklines can impart, as well as the wear and tear of life at the rig site
For more Wireline Pressure Control Equipmentinformation, please contact us. We will provide professional answers.
When fitted to the top of a Grease Injection Control Head, the purpose of a Hunting Line Wiper is to remove excess grease from braided cable when retrieving tools from the well.
The Hunting Hydraulic Pack Off is a simple, reliable means of sealing on a cable during very low pressure open hole operations.
Takes the place of the bottom connection, effectively becoming the joint that has been broken
Pump-In Sub are designed to provide a large flow fluid entry path into the pressure control equipment for hydrostatic testing or for pumping fluid into the well.
Hunting Quick Union Rig-Up Dollies are designed to allow wireline crews to safely bring a lubricator section from the horizontal position to the vertical and then back again.
Reduces operators rig up height during E-line operations, by turning the wire through 180 degrees whilst still within the Pressure Control Equipment
Hunting&#;s revolutionary EziLoad® Stuffing Box was designed to overcome the manual handling problems caused by the increasing weight and awkwardness of conventional Slickline Stuffing Boxes.
The Hydraulic Slickline Stuffing box serves two purposes; guiding the slickline from the bottom hay pulley into the top of the lubricator rigup and containing well pressure whilst the slickline is either moving or stationary.
The Hunting Liquid Seal is used in conjunction with a conventional Hydraulic Slickline Stuffing Box, to give the primary seal on a slickline, maintaining pressure integrity when running into and out of the well.
The Hunting EziCatch Tool Catcher has been designed for use in conjunction with the EziLoad Slickline Stuffing Box.
The Hunting Open Hole Tool Catcher has been developed to eliminate the possibility of a dropped tool string during wireline open hole operations.
Hydraulic Tool Traps are a safety device. Essentially a flapper type valve for tools, they are positioned just above the WLV and can be opened to allow tools to pass into the well.
The Hunting Ezi-Close system offers the operator significant safety advantages in the case of an emergency during slickline, braided line and e-line operations.
Hunting wireline WLVs (wireline valves) are positioned on top of the wellhead, at the base of the lubricator rig up. They are a safety device, to be used in the event of problems when running wireline into a well.
A simple equalising system that allows equalisation across individual sets of rams, with a basic injection port - this type is rugged, easy to use and entirely effective.
Hunting&#;s Compact Hydraulic WLVs can be supplied with virtually any type of Ram Configuration to suit any application.
The heavy duty steel frame protects the WLV and allows for easy movement, either by fork-lift truck or crane.
Hunting's ESSV - HD continues to lead the industry with the new generation for well intervention shear seal solutions
The Hunting AutoLock provides a safeguard against valve damage by automatically locking the hydraulic supply to the actuators when differential pressure is detected across the flapper when opening the valve.
Contact us to discuss your requirements of Wellhead Tool. Our experienced sales team can help you identify the options that best suit your needs.
Comments
Please Join Us to post.
0