The Ultimate Guide to Choosing Mig Welding Wire

MIG welding wire consists of a spooled-up electrode that&#;s fed through a MIG welding &#;gun&#; and is heated to melt metal and join workpieces together. Sounds simple enough, right?

Goto Jinertai to know more.

Well, it&#;s not quite that easy. There are a lot of different types of MIG welding wire, and in this article, we&#;ll explain some of the differences between them, what to consider when choosing welding wire, and the importance of choosing high-quality wire.

Flux-Core vs. Solid MIG Welding Wire

There are two primary types of MIG welding wire &#; flux-core and solid MIG welding wire.

Flux-core wire is a metal electrode that contains a &#;flux compound&#; inside the electrode. When the wire melts and reacts with the welding arc, this forms a gas that protects the weld from oxygen, which can cause defects in the weld. This means that no shielding gas is required for this type of wire &#; though in some cases, shielding gas may be used alongside flux-core wire for even more protection.

In contrast, solid wire electrodes are exactly what they sound like &#; large reels of solid metal wire that do not contain any flux. This means they must be used with a shielding gas. The most common shielding gas is 75% argon and 25% carbon dioxide. The welding gun delivers a steady stream of gas from a container, which surrounds the electrode and weld area to prevent oxidation and defects in the weld.

Depending on the application, both kinds of MIG welding wire (solid and flux-core) can be made from a variety of materials including aluminum, stainless steel, copper, and silver, to name just a few.

Considerations When Choosing MIG Welding Wire

Wondering what you should think about when you choose MIG welding wire? Neither type is superior compared to the other &#; rather, the right choice depends on your situation and preferences. Here are a few things to keep in mind when you pick MIG welding wire.

• Desired weld cleanliness &#; As a rule, solid MIG welding wires used with shielding gases produce a cleaner weld with much less spatter compared to flux-cored wire. Spatter does not necessarily affect weld quality, but it may require additional grinding, polishing and finishing to remove it before painting or other such surface preparations, so solid wire is more commonly used in these situations.
• Workpiece material &#; Different types of wire are used for different materials. ER70S-3 wire is often used for mild steel that&#;s clean, oil-free, and rust-free, while ER70S-6 contains a deoxidizer and is used for mild steel that&#;s contaminated with corrosion or mill scale.
• Environment &#; In very windy or challenging outdoor environments, flux-core wire is usually a better option. The gas used to shield solid MIG welding wire may be blown away while welding in windy conditions, so unless a wind screen is used, this results in a lower-quality weld. Since flux-core wire contains gases that emerge when it&#;s heated, the metal is shielded more effectively in those conditions.
• Wire thickness &#; As a rule, thicker wire is recommended for thicker workpieces. 035-inch diameter wire is the standard used for most welds, but it may not be adequate for very thick pieces of metal. Multiple passes may be required to create a strong weld.
• Weld unit power &#; This is closely related to wire thickness. The higher the voltage and power of a MIG welding unit, the higher thickness it can accommodate. Using a thicker wire is not a good idea with lower-powered MIG welding units. The lower overall amperage and output may result in a failure to melt the workpieces properly and create a quality weld. Always consult the manufacturer&#;s instructions to see the maximum recommended wire thickness.

No matter what type of MIG welding wire you buy, you should always make sure to invest in high-quality wire. Compared to lower-quality welding wire, quality MIG wire is more forgiving, can produce a more sound weld even in less-than-perfect conditions, and still represents only a fraction of the overall cost of welding.

Need Help Finding the Right MIG Welding Wire? Contact Vern Lewis Welding Supply

Vern Lewis Welding Supply has a wide variety of MIG welding wire and MIG welding gases. Whether you&#;re welding steel, aluminum, copper, or any other material, we can provide you with the welding wire and gases you need to get the job done.

No two welding operations are the same. Yet in many cases, companies come to rely on similar filler metals to get the job done. Solid wire is among the most widely used filler metals in the industry. This makes it a common choice for applications ranging from general fabrication and manufacturing to maintenance/repair and pipeline welding. The wire&#;s ease of use contributes to its popularity, and its ability to weld many types and thicknesses of materials. Modern welding technology makes it easier for operators of all skill levels to create quality welds with solid wire.

When choosing a solid wire, consider key factors like material type, application requirements, and desired weld quality. Different classifications offer varying characteristics for each solid wire, all of which can impact weld strength and quality, as well as the amount of post-weld cleanup needed.  

Solid Wire: An Overview

The American Welding Society (AWS) provides multiple classifications for solid wire based on the mechanical and chemical properties each provides. Each letter and number in its nomenclature signifies a specific feature. As an example, for a commonly used solid wire &#; AWS ER70S-6 &#; the &#;ER&#; indicates that the filler metal is an electrode or rod; the &#;70&#; signifies that it has a tensile strength of 70,000 pounds per square inch (psi); and the &#;S&#; means that it is a solid wire. The 6 reflects the chemical composition and shielding gas requirements.

Solid wires that end in S-3 and S-6 are among the most commonly used in the industry for MIG welding. For TIG welding applications, an ER70S-2 cut-length (or rod) is often used. Solid wires are available in a range of diameters. For MIG welding applications, diameters range from 0.023 up to 1/16 inch, whereas solid wires used in submerged arc welding (SAW) processes can be up to 1/8 inch and larger. TIG cut-lengths are available in diameters of 1/16 to 5/32 inches. Typical operating parameters for solid wire depend upon these diameters and in a MIG or SAW process, also on wire-feed speed. The wire feed speed is proportional to the amperage used for the welding application. Voltage can range from 14 volts to more than 30 volts.

Contact us to discuss your requirements of Mig Welding Wire. Our experienced sales team can help you identify the options that best suit your needs.

When using solid wires, spray transfer and short-circuit transfer are two common welding modes. The transfer mode used for an application depends the shielding gas and the welding parameters. To achieve spray transfer mode requires a minimum of 85 percent argon in the shielding gas mixture. The result of this mixture is less undercutting and a more fluid, controllable puddle. The preferred gas for short-circuiting transfer mode is 75 percent argon/25 percent CO2, which provides good arc transfer, lower levels of spatter and a nice appearance of the completed weld bead. 

Common Types of Solid Wire 

Each classification of solid wire has unique benefits, limitations and best uses. Following are some common types of solid wires, along with their attributes. 

AWS ER70S-6 Solid Wires

An ER70S-6 solid wire is the most common choice for welding mild steel. This widely available wire is found in general fabrication, automotive welding applications and can be used for robotic welding, as well as to complete root passes for pipe welding and other critical or industrial applications. It offers smooth and consistent wire feeding, which helps support greater productivity (there is less downtime to address feeding issues), and the wire helps to increase consumable life. With the proper use, it creates smooth weld beads with uniform tie-in.

Welding operators can use ER70S-6 solid wire with 100 percent CO2 to increase joint penetration or with an argon/CO2 blend to help minimize spatter. They should also be aware that these wires tend to generate silicon island deposits on the surface of the completed weld. These deposits must be removed before painting or surface conditioning, potentially increasing post-weld cleaning time.

While solid wires generate low spatter levels on clean base materials, they&#;re not the best option for welding contaminated metals. If, however, there is no alternative, an ER70S-6 wire may be helpful for welding through light rust or mill scale. This wire contains higher silicon and manganese content, which act as excellent deoxidizers.

AWS ER70S-3 Solid Wires

ER70S-3 solid wire is another common choice and is used primarily in applications where a clean finished weld is important. Like an ER70S-6 product, this wire provides good wire feeding, but it also generates a clean weld deposit that can be ready to paint or plate with very little post-weld cleaning. This solid wire is a common choice in automotive and automated welding applications, as well as general fabrication, light sheet metal fabrication and in applications requiring high wire feed speeds.

Like an ER70S-6, this wire can be used with 100 percent CO2 or with an argon/CO2  mix, depending on if greater joint penetration or low spatter is the desired outcome. 

AWS ER80S-D2 Solid Wires

When welding carbon and low-alloy steels, an ER80S-D2 low-alloy solid wire provides higher tensile and yield strength. This wire results in quality welds matched to meet the requirements of many high-strength applications, such as welding construction equipment, pipe, trailers and more. The D2 designator indicates this wire is a manganese-moly alloy. Manganese is a deoxidizer, making it a good option for rusty or dirty metals, it also increases the tensile strength. The molybdenum also offers hardenability, in addition to high-temperature strength.

Higher-alloy content in ER80S-D2 wire can make spray transfer arcs harder to control, causing increased spatter. To combat this issue, welding operators may prefer to use a pulsed MIG process instead. 

Copper-Free Solid Wires

Most solid wires available in the industry have a small amount of copper plating. The plating prevents wire corrosion and improves electrical conductivity between the copper contact tip and steel base material. Adding copper to certain steel base materials, however, can cause problems. In applications where that is a concern, welding operators may prefer to use a copper-free wire.

Copper-free wire allows for slightly lower voltage in spray transfer mode compared to copper-plated wire. For thinner materials, spray transfer mode allows for faster welding and a better deposition rate than short-circuit welding. This change in process can help reduce spatter and minimize heat in the arc to lessen the chance of burnthrough.

When using a copper-free wire, companies need to be sure that the spool or coil of wire isn&#;t stored for long periods of time in the shop or on the jobsite, as the absence of copper can cause the product to rust. A copper-free wire may also cause arcing between the contact tip and base material if the surface finish or lubricant isn&#;t correct; the welding operator may need to adjust welding parameters as a defense against this problem. 

Versatile Options

With any welding operation, finding the right filler metal is key to gaining good productivity and quality, while minimizing costs. Solid wires can offer versatility in many general fabrication applications that require the welding of mild steel and low-alloy steel. Always select the right classification of wire for the job &#; based on the desired mechanical and chemical properties. When in doubt, consult with a distributor or filler metal manufacturer for assistance about the best choice. 

Want more information on Flux Cored Welding Wire? Feel free to contact us.