J Hook Suspension Clamps for Overhead ADSS Cables

ADSS Cable J Hook Suspension Clamp is a crucial component used in the installation of ADSS (All-Dielectric Self-Supporting) cables. This clamp is made up of galvanized steel hooks and rubber lining, ensuring secure and reliable cable suspension.

Want more information on custom adss suspension clamp? Feel free to contact us.

The primary purpose of the ADSS Cable J Hook Suspension Clamp is to provide a safe and sturdy support system for ADSS cables. These cables are commonly used in overhead power line installations, where they need to be suspended in a way that ensures minimal stress and strain on the cable itself.

The galvanized steel hooks used in the clamp offer excellent strength and durability. They are resistant to corrosion, making them suitable for outdoor installations. The hooks are designed to securely hold the ADSS cable in place, preventing any unnecessary movement or sagging.

To further enhance the stability of the cable, the ADSS Cable J Hook Suspension Clamp is equipped with a rubber lining. The rubber lining acts as a cushion, absorbing any shocks or vibrations that may occur. This not only protects the cable from damage but also ensures a longer lifespan for the entire suspension system.

The installation process of the ADSS Cable J Hook Suspension Clamp is relatively simple. The hooks are attached to the supporting structure, such as a pole or tower, using appropriate hardware. The ADSS cable is then placed within the hooks and secured in place. The rubber lining provides additional grip and prevents the cable from slipping or sliding.

One of the key advantages of using the ADSS Cable J Hook Suspension Clamp is its versatility. It can be used in various environmental conditions, including extreme temperatures and harsh weather conditions. The galvanized steel hooks and rubber lining are designed to withstand these conditions, ensuring the stability and integrity of the cable suspension.

In conclusion, the ADSS Cable J Hook Suspension Clamp is an essential component in the installation of ADSS cables. Its combination of galvanized steel hooks and rubber lining provides a secure and reliable support system. With its durability and versatility, this clamp ensures the longevity and performance of ADSS cables in various environments.

Hebei Crown Wealth is a professional supplier of hardware products. Our products include aerial drop hardware, stainless steel strapping, pole line hardware, pipe clamps and custom pole line hardware, which have been sold to more than 60 countries and regions in the world, such as USA, Germany, UK, Canada, Brazil, Chile, Netherlands, Japan, Malaysia, Australia, etc. We have a whole set of quality management systems. If you have interested in our products. please feel free to contact us.

Preformed Suspension Clamp for ADSS Fiber Cable

Suspension Clamp
Fit for: Recommended space less than 100m and corner/elevation angle less than 10° , breaking strength is 10Kn, one set of fitting including one set of clamp( consisting of aluminum clamping plate and rubber pad) and a shackle.
Suspension Clamp for ADSS Fiber Optical Cables 

Short Span Suspension Clamp for ADSS Fiber Optical Cables ADSS

O-ring suspension clamp for ADSS fiber optic cables

O-ring suspension clamp for ADSS fiber optical cables is consist of high strength galvanized steel O-ring and high strength aluminum clad steel helical-formed armor rods. It can connect with U type shackle by the hole of O-ring. The armor rods can provide 20%RTS unbalanced load. It can not cause any damage to the cable by the design of end tilt and has good performance of resistance to the breeze vibration and superior fatigue properties.
 

This kind of clamp is used for connection between cable and linear tower or which corner/elevation angle is less than 25 degree.Each tower has one set.Suspension ClampFit for: Recommended space less than 100m and corner/elevation angle less than 10° , breaking strength is 10Kn, one set of fitting including one set of clamp( consisting of aluminum clamping plate and rubber pad) and a shackle.Suspension Clamp for ADSS Fiber Optical CablesShort Span Suspension Clamp for ADSS Fiber Optical Cables ADSSO-ring suspension clamp for ADSS fiber optic cablesO-ring suspension clamp for ADSS fiber optical cables is consist of high strength galvanized steel O-ring and high strength aluminum clad steel helical-formed armor rods. It can connect with U type shackle by the hole of O-ring.

The armor rods can provide 20%RTS unbalanced load. It can not cause any damage to the cable by the design of end tilt and has good performance of resistance to the breeze vibration and superior fatigue properties.For use on:Span less than 100m, single layerTangent Suspension Clamp for ADSS Fiber Optical CablesTangent suspension clamp for ADSS fiber optical cables is the connection fittings for ADSS cable in transmission line for pole and tower. It can reduce the static stress at the suspension point of the cable, and raise the cable anti vibration ability, inhibition of wind vibration of dynamic stress; It can also keep the cable bending and it does not exceed the allowable numerical and the cable will not generate bending stress, so the cable optical fiber does not produce additional loss.For use on:Span less than 100m, no armor rodsFor use on:100-400 meters, 1 layerSuspension Clamp for ADSS Fiber Optic Cables ADSSSuspension clamp for ADSS fiber optical cables can reduce the compression, clamping and bending stress of optical cable and optical fiber. At the same time, the negative effects caused by the wind, such as the wind vibration, galloping and swing, have also been reduced to the minimum.For use on:More than 400 meters, no more than 100 KN

For more information, please visit what does adss stand for.

Preformed Suspension Clamp for ADSS Cable

Application:

 The Preformed Suspension Clamp is the connecting hardware of ADSS cable hang in transmission line pole (tower). It can reduce static stress at the support point and increase ant-vibration ability of ADSS cables, and cushioned against the dynamic stress of Aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don&#;t produce extra loss in the cables. 

Structure and Material

Housing--- It is made of corrosion resistance cast aluminum alloy, which is stable, better anticorrosive in aero and mechanical performance.                                

Rubber Insert--- It consists of high-class rubber and center reinforcing assembly, rubber insert is with ozone resistance, chemical resistances, weather resistance performance, with high and low temperature performance, high strength and elasticity, small compression deformation.

Bolt, Flat Washer, Spring Washer, Nut, Split Lock, Shackle--- Standard Parts of Electric Power.

Inner Preformed Rods---According to the mechanical performance and chemical composition to custom-made the aluminum alloy wire, with high tensile strength, hardness strength and excellent elasticity and strong rust resistance , it can be used for a long time in the bad weather condition.

Outer Preformed Rods--- The same as the Inner Preformed Rods.

Direction

1. It is designed to connect straight or elevation angel less than 25° pole (tower) and ADSS cables, the special specification: one unit per pole.

2. Select the specification model for Suspension Clamp is corresponding to the appropriate Cable Diameter, Load Weight or span length.

If you are looking for more details, kindly visit custom opgw suspension clamp factories.