You'll want to sufficiently cover the 200 to 400 square foot area you already set up. Apply generous amounts of solution with a mop and let it sit for approximately 10 minutes to loosen the floor finish before continuing to the next step. Do not allow the stripper to dry.
For more information, please visit Fengwang.
If you are looking for more details, kindly visit pre-stripping machine.
Take the specified floor stripping pad and attach it the pad driver on your floor buffer or auto scrubber. Auto scrubbers are often the popular choice for stripping, because they can then be used to recover the stripping solution. If you are using an auto scrubber, leave the squeegee up and scrub the area once completely before putting the squeegee down and scrubbing again while at the same time, recovering the solution. If you are using a rotary floor scrubber, start in the opposite corner of your walk off mat, and slowly move towards that area. Some areas will require several passes to strip the floor completely of the old floor wax. A black utility stripping pad may be needed to properly get into corners and up against baseboards. A baseboard stripper/cleaner may also be needed to properly clean the baseboards.
Want more information on glove manufacturing machinery? Feel free to contact us.
Comments
Please Join Us to post.
0