How can you tell if a microfiber cloth is good quality?

You want to make sure your microfiber towels have a "grippy" feel. The more "grippy" feel of the towel, the more dirt, dust, water, and even bacteria it will pick up! Don't worry, the grippy feel does not take away from the softness of the cloth, so you won't have to be concerned with scratching anything delicate. So here's how to do the Touch Test:

Want more information on microfiber pearl cloth supplier? Feel free to contact us.

1. 1. 1. 1. 1. Run your hand over the towel and ask yourself the following questions.
            2. Is the cloth soft?
            3. Would you use it on the finish of your car?
            4. Does the material grab the imperfections in your skin, getting caught on your hand?

If your towel catches on your hand, it is made with split microfiber. High quality cloths have gone through a splitting process, leaving the fibers to look like an asterisk in cross section. The spaces left by the process is what gives your cloth the ability to pick up dirt and absorb liquid.

If your cloth isn’t split, it won’t be any more effective in cleaning than a cotton towel. Another factor that contributes to how well your towel will clean is the size of each fiber. The smaller the fiber, the more it can pick up.

Microfibers are measured in denier, which is the diameter of each fiber. By definition microfiber must be lower than one denier, which is equal to 10 micrometers. Good quality microfiber towels for cleaning usually have below 0.5 denier. This makes it small enough to pick up a variety of germs, bacteria, and microbes!

For example, our Buff™ Pro and Microfiber Glass Cloths both have extremely low deniers of 0.1 to 0.2. If you are looking for the best quality cleaning cloths, make sure you check the denier (if available).

Microfiber used for cleaning should be less than 1 denier or decitex per thread. The type of denier for these microfiber cloths is an important feature to understand the quality thickness and best cleaning performance for the product’s durability. High-quality microfiber used for cleaning should be smaller than 0.5 denier. The yarn used for our SmartChoice Cloths is 160D/72F and after splitting, DPF will be 160/72/9=0.25 denier. This is the finest split available in the microfiber cloth market.

How can you tell that your cloth is less than 1 denier thick?

You really can’t with the human eye. It’s a question you have to ask your distributor.

Research shows that the quality of the microfiber comes down to the number of splits. The splitting process breaks down each fiber into a very thin strand, estimated to be 1/16 the size of a single human hair.

How do you determine if a cloth has been split?

Rub the palm of your hand across the cloth. If it catches slightly on the surface of your hand, it has been made with split yarns. Another way to tell is to push a water spill with it. A microfiber cloth that has been split will absorb the water, not push it.

The company is the world’s best carbon microfiber supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

You should be mindful, that a thick, fluffy microfiber towel with a little bit of nap on it may feel softer and appear to be a better product, but it is not. Better microfiber cloths are actually tighter and more tightly woven, which makes them feel stiffer.

Test the cloth by holding it up to the sunlight, stretch the cloth, and if it is a tight weave and you don’t see a lot of sunlight, it’s a high-quality cloth. If it stretches easily and you see a lot of light, it is not a high-quality cloth.

Our SmartChoice cloths are a great example of a high-quality cleaning cloth. While different microfiber cloths may appear similar at first, compare the quality yourself.

How will I know that a microfiber cloth is of good quality?

There are tests you can perform to see the quality of the cloth you buy. One test is to rub hand lotion on a mirror. Look at the number of passes it takes to remove the lotion — the SmartChoice cloth will do it in only one or two passes.

No matter the thickness of the cloth, there are a couple of things you should look for in microfiber cleaning cloths.

There are many sizes of microfiber cloth, which one is right for me?

A microfiber cloth should be large enough to be folded four times to complete the job. This allows for cleaning several different surfaces by unfolding and re-folding the towel with the clean side exposed.

How can I tell that a microfiber cloth will last a long time?

Heat sealing around the perimeter of the cloth is another valuable feature since it helps the fabric withstand multiple washings.

Recently automated machines have taken over to cut and sew the cloth hems. While quicker, they do not heat seal the edges, which shortens the life of the cloth. Read More.

If you are looking for more details, kindly visit wholesale microfiber suede cloths.